VINGLI Pool Vacuum Cleaner Automatic Sweeper Swimming Pool Creepy Crawler Vacuum

Description

Note:The vacuum requires at least a 3/4hp swimming pool pump or 1600ghp to function properly.
Easy to Set Up & Efficient Cleanning & Super Quietly. This pool vacuum cleaner is very easy to assemble and install and allows you to clean your pool effortlessly and quietly unlike some other automatic pool cleaners that make an annoying hammer noise. Low noise create a quiet operate environment.
Great Suction Power & Can’t Stuck: This automatic pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum can efficiently remove dirt debris. Wheel Deflector for movement around tight corners. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
Save Your Time Make Your Life Easier: Our pool vacuum provide a quick and easy way to clean your swimming pool. No jamming or breaking interrupting the cleaning process. It keeps the pool clean and it will cut down a lot on your time spent cleaning the pool.
Worry-Free Guarantee : One year warranty if any part of this item broken you can contact us for a free replacement.We go above and beyond to provide the highest quality product. If you have any questions or concerns about your order please keep in touch with us we’ll always provide you a timely and satisfying solution.
Free Hoses: Our swimming pool vacuum come with ten durable hoses for replacement. You can attaches this pool sweeper to your existing filtration system.The caliber of the pipe is 1.5”

In order to peotect vacuum the cleaner can work on curved surfaces but do not clean the stair on the pool.

The pool vacuum can clean algae dirt and dust but can not clean leaves.

Just drop into the base of pooland the max deep is 9.8ft.

Vacuum head blue skirt and hose size display.

Comes with ten hoses one weight one regulating valve diaphragm.

If the hose is too long or too short you can increase or reduce hose.

Each hose diameter is 1.96 inch.

There a special hose which need to connect to pool vacuum and other hose neen to connect with that.

Come with 10 hoses total 33 ft each hose is 3.3ft.

White little weight can keep balance when you clean the pool and seal the hose.

Need to install the blue disc counterclockwise.

In order to get great usage effect should be no air in hoses before using. Make sure the hoses in no leak and the pressure is normal.

The diaphragm is silent and service life is 200 hours.

NOTE:

1. If the vacuum doesn’t work please check diaphragm especially of the diaphragm mouth inside see if there is a gap inside and check if any small rock stuck in the diaphragm.

2. If suction is too large or small need to adjust the regulating valve.

3. If vacuum stop work when it reaches the surface of the pool you need to adjsut regulating valve and adjust suction lower.

Problem: Cleaner is sluggish or has stopped operating.

4.The vacuum requires at least a 3/4hp swimming pool pump or 1600ghp to function properly.If the pipe disconnects when the pump is turned on check that the pipe joints are fitted tightly then check for blockages and give the cleaner a good unclogging if there are any.

Solution:

● Check if the pump is ON and / or primed.

● Check Cleaner head for blockages.

● Clean and empty pump basket and empty skimmer/weir basket.

● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool pump as per manufacturers specifications.

● Inspect the regulator valve and flush away any debris build-up.

● Check the Mat for wear.

● Make sure the curved tips of the Mat are facing upwards.

● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.

● Check the hose for blockage.

● Check the hose for leaks by lifting each section above water while pump is running.

● Consult a pool shop in your area.

Problem: Cleaner travels in a repetitive pattern.

Solution:

● Adjust return jets downwards.

● Verify proper hose length.

● Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary.

● This should be done at the deepest part of the pool.

● Remove or add one hose section.

● Inspect the Regulator Valve and flush away any debris build-up. ● Check that the hose sections are straight; if not lay hose in a straight line in the sun to relax the memory.

● Twist each hose section a half-turn at each connection point.

Clean Area Note

Cleaning Type

Underwater Work

Product Specification

Accessories Display

Hose Diameter

Ten Hoses

White Little Weight Function

Blue Disc Installation

No Air In Hoses

Diaphragm